20 Trailblazers Are Leading The Way In Saab 93 Key Fob

How to Replace a Saab 9-3 Key

The Saab 9-3 has a great amount of appeal for drivers. It has excellent visibility and a strong performance engine. It also has a top safety rating.

It is vital to have two keys that work for your vehicle. If you lose one key, it could be costly to purchase an additional one.

How to Replace the Ignition Key on the Saab 9-3

If your car's key doesn't engage in the ignition you must replace it. This guide will walk you through how to do it on a Saab 9-3. You'll need to replace the key, get an additional reprogrammable cell and buy a new case for your key-fob.

Modern Saab models utilize transponders instead of a traditional key to unlock the car and then start it. The issue with this is that the reprogrammable batteries in the key-fob eventually wears out and lose charge for any longer. This is particularly applicable if you are using the same key for the same lock.

The good news is that it is easily replaced by an experienced locksmith. If you have the proper tools, and a little patience you can do it yourself. The first step is separating the key-fob. Insert flatheads into the slot in the middle of your case. It is essential to work slowly, as the plastic is very thin and easily damaged.

Once the case has been opened, you can make the new key by combining the lower part of the old key with a transponder and banana. This will ensure the new key is properly mated to your CIM, which can make a huge difference when replacing the sole key on your Saab 9-3.

How to replace the ignition Key in a Saab 900

Unless you have two keys, you'll have to take off the dashboard and steering wheel to gain access to the ignition. Begin by disconnecting the negative battery cable. After the battery has been removed, you can remove all trim pieces and dashboard pieces that surround the steering wheel. After the dashboard has been removed, you can put screws into the hole behind the ignition switch.

The ignition barrel has the key lock, which could stop the car from starting if a key isn't present in the. If your 900's ignition switch isn't working, look at the key to determine whether it's in the lock or in the barrel of the ignition. It is also important to rotate your keys and keep them clean to avoid being bent.

Saab cars are different from other vehicles in that they don't use traditional keys made of metal. Instead, the car is able to recognize electric signals from the key fob by using the use of a specific microchip.

If you only lose one working key fob your dealer will charge an additional fee to replace your computer module (also called the CIM). We can reprogram the EEPROM on your existing computer and allow it to accept new keys, without the need to replace it. This will save you up to 50% of the cost the dealer charges! We call it the SAAB Key PROGRAM. Find out more here!

How to replace the ignition Key on a Saab 9-5

The metal part of a traditional Saab key is easy to copy, and not a major obstacle against vehicle theft. The real security is the electronic component in the key-fob, which is equipped with a chip that recognizes your car when it's put into the ignition switch.

Saab's anti-theft system has relied upon this technology for more than a decade. It's not quite as effective as a physical lock for your door however it makes stealing your car much more difficult. This is why every Saab owner should always have an extra key in their possession.

The majority of new Saabs are delivered with two keys. However, they are also available for purchase at an agent using a handheld device called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder).  saab key fob replacement  to this rule is the NG 9-3 vehicles which are more modern and newer features that require an ignition key.

The dealer will replace the CIM or TWICE module in these cars if all keys have been lost, and charge you top dollar for this. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.

How do you replace the ignition Key in an XC90 Saab

If your SAAB 9-3 key fob is having trouble turning the lock barrel it's possible that it's time to replace it. It's fairly simple and doesn't require you to visit an agent. You can complete the process at home using a few basic tools.

First, you'll need to prepare the new keys. Before you start, disable the anti-theft feature by placing blocks under your rear wheels and engaging your handbrake. Next, put the key in the ignition and turn it to the ON position which activates the accessories, but it doesn't start the engine. Repeat this five times, and then keep the key on the "on" position.

The next step is to buy a new case for your key fob. They are readily available at many auto parts stores and are typically inexpensive. Based on the model, you can even get them without any electronics.

To open the case, place an flathead screwdriver into the slot located in the middle. Gently work it. Once you split the case, you'll have access to all of the internal electronic components. To remove the electronics, make use of a small screwdriver and attempt to pull them out with a gentle force.